超疏水低粘着铜表面制备及其防覆冰性能

用喷砂处理在铜片表面形成微米级丘陵状凹坑,再用表面氧化处理在铜片表面制备菊花花瓣状CuO纳米片.通过喷砂-表面氧化处理在铜片表面成功构建了微米-纳米复合结构,这种表面氟化后与水滴的接触角高达161°,滚动角低至1°,显示出优异的超疏水性和很低的粘着性.低温下,这种表面与水滴间的热量交换较小,水滴不易凝结,有效地提高了抗结霜性.抗结霜性良好的超疏水铜有望在热交换器或低温运行设备等领域获得应用,这种简便的超疏水铜表面的制备方法也给其它工程材料超疏水表面的工业化制备提供了一个思路.     

用光学干涉法测量材料的高温线膨胀系数

采用石英传递杆将高温区材料的线膨胀量传递到室温区,并利用标准件进行标定的方法消除由传递带来的附加线膨胀量的影响,利用迈克耳孙干涉仪测量微小位移的原理,测量材料的线膨胀系数;测量相对误差仅为1.0％,而且测量过程非常直观简单.     

Synergistic effect between Sn and K promoters on supported platinum catalyst for isobutane dehydrogenation

Catalytic dehydrogenation of isobutane has recently received considerable attention because of the increasing demand for isobutene.In this study,the synergistic effect between Sn and K on PtSnK/γ-Al2O3 catalysts has been investigated by changing the content of Sn.It was found that with the presence of potassium,suitable addition of Sn could not only increase the metal dispersion,but also reduce the catalyst acidity.In these cases,the synergistic effect could also strengthen the interactions between the metal and support,which resulted in an increase in both catalytic activity and stability.In our experiments,Pt-0.6SnK/Al catalyst exhibited the lowest deactivation rate (12.4%) and showed a selectivity to isobutene higher than 94% at the isobutane conversion of about 45.3% after running the reaction for 6 h.However,with the excessive loading of Sn,surface property of active sites and the interactions between metal and support were changed.As a result,the initial optimal ratio between the metallic function and acid function would be destroyed,which was disadvantageous to the reaction.     

Theory of Microbial Carbonate Precipitation and Its Application in Restoration of Cement-based Materials Defects

Bacterial induced carbonate mineralization has been demonstrated as a new potential method for restoration of limestones in historic buildings and monuments. We claim here the formation of calcium carbonate was controlled by extracellular polymeric substances (EPS) isolated from Bacillus pasteurii. The process of crystallization nucleation was accelerated in the presence of cells and inhibited in the presence of EPS. The CaCO₃ film deposited on cement paste surface was about 100 µm after 7 d treatment. The results of various restoring methods showed that higher decrease of water absorption of cement paste was gained in brushing application in the presence of agar, which could maintain urease with high activity in long term compared to spraying method. The coefficient of capillary suction of cement paste treated with brushing method was reduced by 90%. Mixed media consisted of sands, urea, Ca²⁺ and concentrated biomass, was injected into artificial cracks of cement paste followed by continual nutrient supplement, and CaCO₃ particles were precipitated gradually between sands particles which were combined with cement matrix. The results showed that the compressive strength of recovered specimens was restored to 84%, which demonstrated that this kind of bio‐restoration method is effective in repairing surface defects of cement‐based materials.     

A Chemically Triggered and Thermally Switched Dielectric Constant Transition in a Metal Cyanide Based Crystal

A dielectric constant transition is chemically triggered and thermally switched in (HPy)₂[Na(H₂O)Co(CN)₆] ( 2 , HPy=pyridinium cation) by single‐crystal‐to‐single‐crystal transformation and structural phase transition, respectively. Upon dehydration, (HPy)₂[Na(H₂O)₂Co(CN)₆] ( 1 ) transforms to its semi‐hydrated form 2 , accompanying a transition from a low‐dielectric state to a high‐dielectric state, and vice versa. This dielectric switch is also realized by a structural phase transition in 2 that occurs between room‐ and low‐temperature phases, and which corresponds to high‐ and low‐dielectric states, respectively. The switching property is due to the variation in the environment surrounding the HPy cation, that is, the hydrogen‐bonding interactions and the crystal packing, which exert predominant influences on the dynamics of the cations that transit between the static and motional states.     

苯并三唑对水泥砂浆中钢筋的阻锈作用

应用腐蚀电位(E_corr)、极化电阻(R_p)和砂浆保护层电阻率(ρ_c)研究了苯并三唑(BTA)对钢筋电极腐蚀电化学行为的影响. 通过电化学阻抗谱(EIS)、循环极化(CP)和循环伏安(CV)结果对比了BTA与NaNO₂ (SN)对钢筋电极在未处理、预锈蚀和内掺氯盐3种状态下3.5% (w)氯盐浸泡360 d后的阻锈效率. 利用环境扫描电镜(ESEM)与能谱分析(EDS)解释了BTA对水泥基材料中钢筋的阻锈机理. 结果表明: 3种状态下BTA均能明显降低砂浆中钢筋的均匀腐蚀速率, 且其阻锈效率高于SN. 在未处理与预锈状态下, BTA抑制点蚀的能力稍弱于SN; 但在内掺氯盐的状态下, BTA表现出了较大的点蚀阻力. BTA除了能在钢筋表面形成复杂的保护膜, 从而有效抑制氯盐的破钝化作用. ESEM/EDS结果表明BTA还能与砂浆基体形成较多富钙C-S-H凝胶, 可能优化了钢筋/砂浆界面区的孔结构, 形成更致密的微观结构, 显著延缓了氯盐向钢筋表面的传输进程, 较好地保护了钢筋. 适量的BTA对砂浆360 d的基本力学性能无明显影响.     

Global exponential stability of BAM neural networks with time-varying delays: The discrete-time case

This paper deals with the problem of stability analysis for a class of discrete-time bidirectional associative memory (BAM) neural networks with time-varying delays. By employing the Lyapunov functional and linear matrix inequality (LMI) approach, a new sufficient conditions is proposed for the global exponential stability of discrete-time BAM neural networks. The proposed LMI based results can be easily checked by LMI control toolbox. Moreover, an example is also provided to demonstrate the effectiveness of the proposed method.     

近距离爆炸比例爆距的界定标准及荷载模型

如何准确界定“近距离爆炸（close-in explosion）”一直是防护工程研究领域的热点。本文中基于已被充分验证的精细化有限元模型,研究了TNT球形装药自由场爆炸冲击波传播与爆轰产物高速膨胀共同作用的特点和规律,发现在比例爆距小于0.80 m/kg1/3的范围内,爆轰产物对刚性壁面的爆炸荷载影响显著,提出球形装药近距离爆炸的比例爆距界定标准为0.30～0.80 m/kg1/3。研究发现,在近距离爆炸下,爆炸波在入射角为0°～5°范围内的刚性壁面反射荷载峰值会出现急剧下降的现象,这是由爆轰产物喷射的不均匀性和随机性导致的;近距离爆炸下,刚性壁面反射超压出现了两个峰值的现象,这是由冲击波和爆轰产物分别与刚性壁面相互作用导致的。提出了近距离爆炸情况下两个荷载峰值的计算公式,以及适合工程结构响应计算的简化荷载模型;揭示了近距离爆炸下刚性壁面反射超压的分布规律。     

白光LED用Ca_8Mg(SiO_4)_4Cl_2:Eu~(2+),Dy~(3+)发光粉的发光性能

采用高温固相法合成了白光LED用Ca8Mg(SiO4)4Cl2:Eu和Ca8Mg(SiO4)4Cl2:Eu,Dy绿色发光粉。研究发现:共掺Dy可以明显地提高Ca8Mg(SiO4)4Cl2:Eu发光粉的发光性能,表明Dy3+和Eu2+之间存在着能量传递过程。当Dy3+的最佳掺杂摩尔分数为0.02时,发光粉505nm处绿光发射的强度约提高12%。通过对Dy3+和Eu2+光谱特性的分析,Dy3+和Eu2+之间的能量传递机制可归因于无辐射交叉弛豫。